Litigation cost estimates and budgets with AI support
By the ChamberOne team 5 minute read
A client asks what the case will cost and the honest answer is 'it depends'. Clients know that, and they still want a number they can plan around. Firms that give a range with reasons, and revise it as things change, tend to keep trust. The raw material for a good estimate is already sitting in your time records. AI can help turn it into a budget, as long as a litigator owns the assumptions.
Key points
- Base estimates on your own closed matters, grouped by phase, and look at ranges, not averages.
- Use AI to organise data and draft documents; do the sums yourself and verify them.
- State assumptions plainly, including those in the client's control.
- Review at each phase and warn the client before a budget is exceeded.
Start with your own history
Generic benchmarks are weak guides to what your firm charges to run your cases. Your closed matters hold better evidence: how many hours went into pleadings, disclosure, expert evidence, interlocutory applications and trial, who did the work, and what was written off.
Pick closed matters that resemble the new one in type, value, complexity and court. Group the time by phase. The range across them, not the average, is the useful result. A phase that ranged from modest to enormous tells you where the uncertainty lives.
Where AI helps with estimating
AI tools are good at organising messy information. In budgeting they can help in these ways.
- Mapping free-text time narratives to phases, when entries were not coded consistently.
- Summarising what happened in similar past matters, to help the partner recall drivers of cost.
- Drafting a first version of the budget document, with phases, tasks and stated assumptions, from your inputs.
- Listing questions the client may ask, so that the partner can prepare answers.
- None of that replaces arithmetic you can check. Do the sums in a spreadsheet you control, and verify any figure the tool produces against the underlying records.
- Mapping free-text time narratives to phases
- Summarising similar past matters
- Drafting a first version of the budget document
- Listing questions the client may ask
- The sums, in a spreadsheet you control
- Checking every figure against the underlying records
- Owning the assumptions
Build the budget by phase
A phase-based budget is easier to explain and to update than a single figure.
- 1
Divide the case into phases that match its natural stages: pre-action, pleadings, disclosure or discovery, witness and expert evidence, interim applications, trial, post-judgment.
- 2
For each phase, list the tasks, who will do them and the hours at the expected rates.
- 3
State the assumptions: number of witnesses, volume of documents, number of hearings, whether an expert is needed, whether the other side will cooperate.
- 4
Give a low, expected and high figure for each phase, and say what moves a phase between them.
- 5
Add disbursements separately: court fees, experts, counsel, transcripts, travel.
- 6
Say what is outside the budget, such as appeals or satellite disputes.
Explaining assumptions to the client
A budget with unstated assumptions is a promise you cannot keep. A budget with clear assumptions is a shared understanding. Walk the client through the main ones in plain words: this figure assumes the other side admits these facts; this one assumes a single expert; this one assumes the trial lasts a set number of days.
Tell the client which assumptions are in their hands. If they supply documents late or change instructions, the budget will move. Saying so at the start is easier than explaining it later.
Check the guidance from your regulator or bar on cost information to clients, and on what must be provided in writing, and follow it for your matter.
Updating as the case moves
The budget is a living document. Set a rhythm for review: at the end of each phase, and whenever something happens that breaks an assumption. An unexpected application, a new party, a much larger document set, a change of the other side's lawyers.
Report actuals against the budget in simple terms: spent so far, expected to complete the phase, variance and reason. AI can help draft the explanation of a variance from time records, but the fee earner should confirm the reason is true. Warn the client before the budget is exceeded, not after.
- 1Review at the end of each phase or when an assumption breaks
- 2Report spent so far, expected to complete, variance and reason
- 3Have the fee earner confirm the reason is true
- 4Warn the client before the budget is exceeded
- 5Revise the budget and carry on
- Then back to step 1.
Limits and honest caveats
Past matters do not predict the future when practice has changed, when the court's procedures are different or when the other side behaves unusually. Small samples mislead. A single enormous matter can distort an average.
Be careful about using AI to produce a precise-looking figure with no explanation. If you cannot explain how a number was reached, do not give it to the client. Treat the budget as an estimate, call it one, and record what it was based on.
Costs rules differ by jurisdiction, including what can be recovered from the other side. Take care not to present a budget as a prediction of recoverable costs unless you have analysed the local rules.
A hypothetical example
Suppose a commercial litigation team is asked to budget a contract dispute of moderate value. They pull six closed matters of similar type and group the time by phase. Pleadings are tightly clustered. Disclosure varies widely, and the two highest cases involved a large volume of electronic documents. Expert evidence appears in four of the six.
The team gives the client three figures for disclosure, tied to the volume of documents, and says that the high figure applies only if the volume exceeds a stated size. They explain that an expert will probably be needed and give a range for that too. The client now understands what drives cost and which events would move it. When disclosure turns out larger than assumed, the conversation about the revised budget is short, because both sides expected it.
An AI tool helped by sorting free-text time entries into phases and drafting the narrative of assumptions. A partner checked the figures against the time records and rewrote two assumptions that did not reflect how the court in question manages cases.
Questions to ask before relying on a tool
If you use software to assist with estimates, ask what data it draws on. Is it your own matter history or a pooled benchmark from other firms? If pooled, how are the matters selected and anonymised? Can you see how a figure was derived? Can you override it and record why?
A tool that cannot show its working should not be the basis of a figure given to a client. A tool that shows its working, and lets you adjust it, can save time on the assembly of data while leaving judgement with the lawyer.
This article is general information about the law, legal practice and technology, current when it was published. It is not legal advice. Laws and guidance change: check the sources linked above and take advice on your own circumstances from a lawyer qualified where you are.
Read next
India: arbitration, court intervention and awards, as the law stands in November 2026
The 1996 Act governs Indian arbitration; the Supreme Court has allowed limited modification of awards, and the 2024 amendment Bill is a draft.
6 minute readElectronic evidence under the Bharatiya Sakshya Adhiniyam
Section 63 of the BSA replaced Section 65B from 1 July 2024, adding a prescribed certificate format, mandatory hash values and an expert co-signature. This article explains every change that matters in practice.
6 minute readAI in Witness Bundle and Proof of Evidence Preparation: What to Automate and What Not To
A practical guide for litigators on which parts of witness bundle and proof of evidence preparation AI can handle, and which parts it must not touch.
6 minute read